P2A45
Alternative Fuel Tank B Pressure Sensor Circuit Intermittent/Erratic
P2A45 completes the tank B pressure group with the case that the other codes miss: the signal is mostly fine but jumps or drops out for moments, faster than any real gas pressure could change. Typical culprits are a plug that loses contact on rough roads, a wire rubbed through along the frame rail or a sensor with a cracked solder joint. Because the fault comes and goes, a single clean reading proves nothing. How such faults age out is described in Ford's material on its 2003 bi-fuel CNG trucks: once the condition stops, the lamp goes dark three trips later and the stored code disappears after forty. No manufacturer documents P2A45 itself; the logic follows the tank A counterpart P01A2 and the CARB rules for input components. Wiggle the harness while watching live data.
Possible causes
- Tank B sensor plug with loose or corroded contacts high
- Harness chafed along frame or gas line medium
- Intermittent internal fault in the sensor low
Symptoms
- Check engine light that comes and goes
- Gas gauge flickering or jumping
- Occasional unexpected switch to petrol on bi-fuel vehicles
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A45
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.