OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A43

Alternative Fuel Tank B Pressure Sensor Circuit Low

P2A43 is stored when the signal of the tank B pressure sensor drops below its lower electrical limit, a level that no real tank pressure produces. The usual reasons are a signal wire grounded against the frame, a missing 5 V reference or an internal short in the sensor. For the tank A sensor, TransEco's AFCM list puts exactly these faults under its Low code, with a substitute value of 3600 psi and the lamp switched on in both dedicated and bi-fuel setups. Because a low signal looks like an empty cylinder, the gauge may drop to zero and tank B may be locked out although it still holds gas. No manufacturer documents P2A43 itself. Ford's 2014 Boss 302S table carries the tank A version P01A0 as a lamp code, a sign that the family is treated as emission-relevant.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 43

Possible causes

  • Signal wire shorted to ground high
  • 5 V reference open or pulled down by another sensor medium
  • Internal short in the tank B sensor medium

Symptoms

  • Check engine light
  • Gauge drops to empty for tank B
  • Less usable gas range

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A43

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication