OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A41

Alternative Fuel Tank B Pressure Sensor Circuit

Some multi-tank CNG installations give a second cylinder, tank B, its own pressure transducer, so the module knows the remaining gas per tank and can check that the tank valve responds. P2A41 is the general electrical fault of that sensor, set when the circuit is faulty without a clear verdict of low or high. Publications only describe the single sensor of tank A: on Ford's 2003 bi-fuel CNG trucks it is built into the regulator and drives the gauge, which the AFCM forces to empty when the sensor fails. The upfitter TransEco substitutes a fixed 3600 psi and keeps running. No manufacturer lists P2A41. Check the 5 V feed, signal and ground at the tank B sensor plug first; P2A43 and P2A44 separate the low and high cases, P2A45 brief dropouts.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 41

Possible causes

  • Plug at the tank B sensor loose, corroded or harness damaged high
  • Tank B pressure sensor faulty medium
  • 5 V reference or sensor ground disturbed medium

Symptoms

  • Check engine light
  • Gas gauge wrong or showing empty
  • Tank B possibly no longer used

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A41

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication