OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A3E

Alternative Fuel Delivery Error

P2A3E is the alternative fuel version of P0148: the system cannot supply the gas or propane quantity the engine asks for. Ford had already defined its own code P1048 with this wording, listed with a lamp in the 2014 Boss 302S OBD table. Roush CleanTech's liquid propane system on Ford trucks shows how a delivery error is judged, there still under P0148: the pump voltage has climbed to its adaptive maximum while fuel trims run lean. Roush names a clogged filter, a tripped excess-flow valve, a closed tank or rail supply solenoid and a partly closed manual valve, and calls that code non-MIL. GM's 2015 bi-fuel Impala switches to the other fuel when one supply fails. No public source uses P2A3E itself; drivers mainly notice hesitation and a change to petrol.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 3E

Possible causes

  • Gas or propane filter heavily restricted high
  • Tank solenoid, rail solenoid or manual valve not fully open medium
  • Excess-flow valve on the tank tripped medium
  • Weak propane pump or pressure regulator not holding pressure medium
  • Tank pressure too low because the tank is nearly empty low

Symptoms

  • Hesitation or stalling on gas
  • Automatic switch to petrol
  • Lean fuel trim codes stored as well
  • Warning lamp depending on manufacturer

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P2A3E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication