OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A32

AFCM Power Relay Control Circuit/Open

Gas installations that carry a separate control unit for the gas side, the AFCM, may feed that unit through a relay whose coil is switched by a driver stage. P2A32 means this coil circuit shows no current path: the driver output sees an open line, a missing plug or a burnt coil. Ford's 2003 bi-fuel CNG pickups show how such a module manages relays itself; it energises the ALT fuel relay feeding the tank and rail solenoids. No manufacturer publishes P2A32 itself, so the logic is inferred from the engine-module counterpart P0685: on Saab's 2010 V6, GM Europe compares commanded and actual driver state and reports a mismatch lasting 4 s, or 30 s in total. If the relay never pulls in, the gas side stays dead and a bi-fuel vehicle keeps running on petrol.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 32

Possible causes

  • Broken control wire or unplugged relay socket high
  • Relay coil burnt out medium
  • Blown fuse in the coil feed of the relay low
  • Output driver in the controlling module faulty low

Symptoms

  • Check engine light, depending on calibration
  • Gas mode cannot be selected, vehicle stays on petrol
  • Dedicated gas engine: no start

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2A32

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication