P2A31
Alternative Fuel Tank Shutoff Valve E Control Circuit High
P2A31 closes the shutoff valve series with the high fault on valve E: the module measures voltage on the control wire where none should be. TransEco names a short to power and lights the MIL while the gas system continues; it prints P2A21 beside the code. Ford's Boss 302S list includes P2A31 without a MIL marker. In operation this can mean that cylinder E keeps supplying gas when the module wants it locked, for example after the inertia switch has tripped, the device through which Ford cut gas on its 2003 bi-fuel CNG vehicles. In the J2012 range the AFCM power relay codes follow from P2A32 onwards. P2A30 is the low-side code for the same valve, P2A2D the high fault on valve D.
Possible causes
- Valve E wire shorted to a voltage source high
- Driver for valve E in the module stuck on medium
- Valve E fed from a wrong circuit after an upfit low
Symptoms
- Check engine light
- Cylinder E not locked when it should be
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A31
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.