P2A30
Alternative Fuel Tank Shutoff Valve E Control Circuit Low
P2A30 sets when the control circuit of shutoff valve E reads low. TransEco Energy's AFCM v1.4 table names a short to ground or an open lead as the reason and keeps both dedicated and bi-fuel vehicles running, MIL on; P2A20 is listed beside it. Ford's Boss 302S code list contains P2A30 as well. A low reading on valve E alone points to the branch of the harness serving that cylinder. If B to E show low faults together, a shared ground or a connector close to the module is the more likely culprit. Tanks of this kind hold gas at up to about 24,800 kPa, so only trained staff should open any part of the system. P2A31 is the matching high fault, P2A2E the open circuit.
Possible causes
- Control lead of valve E touching ground high
- Shared ground or connector near the module (several low codes together) medium
- Shorted coil in valve E low
Symptoms
- Check engine light
- Gas from tank E not usable
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A30
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.