P2A2A
Alternative Fuel Tank Shutoff Valve D Control Circuit/Open
P2A2A marks an interrupted control circuit at shutoff valve D, which only exists on installations with four or more gas cylinders, mostly commercial trucks, vans and buses. When the module energizes the coil and measures no current, it stores this code. No manufacturer documents P2A2A publicly. If valves A to D all report open circuits at once, a shared feed is the suspect: in Ford's 2003 bi-fuel CNG design the tank solenoid draws its power through the inertia switch and the ALT fuel relay, and a multi-tank system wired that way would lose every valve together. A single code instead points to the coil, plug or lead of valve D. CARB's comprehensive component monitoring forms the legal basis.
Possible causes
- Break in the branch of the harness leading to valve D high
- Coil of valve D open medium
- Common supply via relay or inertia switch interrupted (several valve codes at once) low
Symptoms
- Check engine light
- Reduced usable gas quantity
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A2A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.