P2A26
Alternative Fuel Tank Shutoff Valve C Control Circuit/Open
P2A26 is the open-circuit code for shutoff valve C, the solenoid on yet another gas cylinder. The module drives the coil and finds that no current flows, so the coil, its plug or the lead to it is interrupted. No manufacturer documents P2A26 publicly. What the repair costs depends on the design: in GM's single-tank bi-fuel Impala (bulletin PI1330) the high-pressure solenoid is threaded into the tank's manual valve and counts as non-serviceable, so a faulty one means a new tank, whereas New Flyer buses allow the coil alone to be exchanged. CARB requires output components to be watched for open and shorted circuits. Valves B, D and E have their own open-circuit codes, P2A22, P2A2A and P2A2E.
Possible causes
- Interrupted lead or unplugged connector at valve C high
- Open coil in valve C medium
- Faulty driver for valve C in the control module low
Symptoms
- Check engine light
- Gas in cylinder C cannot be used
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A26
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.