P2A24
Alternative Fuel Tank Shutoff Valve B Control Circuit Low
P2A24 means the alternative fuel module sees the control line of shutoff valve B sitting too low. TransEco Energy, which converts trucks to CNG, assigns it in the fault table of its AFCM v1.4 to a lead shorted to ground or open, lights the MIL on dedicated and bi-fuel systems alike and does not force a fallback. The same table prints P2A14 in a second column beside it, a number that current code lists give to injection pump metering C. Ford's 2014 Boss 302S code list also includes P2A24, though without the MIL marker it shows for P224E. Chafed wires along the cylinder mounts are a classic cause. P2A25 is the high counterpart, P2A28 the matching fault on valve C.
Possible causes
- Control wire of valve B chafed through to ground at a tank bracket high
- Open lead, which the TransEco module reports under this code medium
- Shorted turns in the coil of valve B low
Symptoms
- Check engine light
- Gas from tank B unavailable, range reduced
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P2A24
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.