OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A21

Injection Pump Fuel Metering Control F High (Cam/Rotor/Injector)

P2A21 marks a high reading in the circuit of the sixth metering element, F. The control module sees battery potential on the line or a current exceeding the driver limit – for instance when the harness rubs through onto a supply wire or the actuator coil is partly short-circuited. A driver stage that protects itself may then switch the output off, so the element can no longer meter at all. No manufacturer publicly documents P2A21. Saab's 2002 V6 diesel shows the consequences of a comparable short in one of its two pump valves: P0259 after 2.1 s, with pedal response limited to 30 % and rail pressure to 60 MPa. The low-side fault of F is P2A20, the functional one P2A1F.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 21

Possible causes

  • Partly short-circuited coil of metering element F high
  • Harness of element F chafed onto a supply wire medium
  • Damaged output stage in the engine control module low

Symptoms

  • Check engine light on
  • Severely limited power and throttle response
  • Possible stalling

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2A21

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication