P2A1F
Injection Pump Fuel Metering Control F Range/Performance (Cam/Rotor/Injector)
P2A1F says that metering element F does not reach its target although its wiring checks out. Volvo and Mack document it for their US17-generation 11 and 13 litre engines, alongside P0257 and P2A17. On these engines three pumping injectors, driven through rockers by double cam lobes, deliver fuel into the rail at up to roughly 35,000 psi. Two causes are named in their bulletins: an injector lobe on the assembled camshaft that has turned on the shaft – checked by barring the engine over and watching each lobe – and genuine rail pressure problems listed together with leak and low-pressure supply codes. For the latter, Volvo requires current Premium Tech Tool software and the guided test. Expect lack of power; repairs range from software to a new camshaft.
Possible causes
- Injector lobe spun on the assembled camshaft (Volvo/Mack US17) high
- Low-pressure supply too weak or a leak in the rail system medium
- Worn pumping injector of element F medium
- Outdated workshop software misleading the guided test low
Symptoms
- Check engine light on
- Lack of power
- Rail pressure codes stored alongside
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2A1F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1971.1
- static.nhtsa.gov/odi/tsbs/2019/MC-10154397-9999.pdf
- static.nhtsa.gov/odi/tsbs/2019/MC-10154332-9999.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10213310-0001.pdf
- fleetmaintenance.com/equipment/powertrain/article/21131180/getting-the-most-out-of-heavy-duty-fuel-injection-systems