P2A1D
Injection Pump Fuel Metering Control E High (Cam/Rotor/Injector)
P2A1D tells that metering element E's circuit sits above its plausible range. Faults that cause it include a lead rubbing through onto a powered wire, moisture bridging pins, an actuator winding shorted internally so that current climbs, or a defective output stage in the control unit. Element E only exists where five or more metering elements are driven individually. No manufacturer publishes P2A1D. Saab's 2002 V6 diesel offers a comparison: an internal short in one of its pump's two pressure valves persisting for more than 2.1 s sets P0259, and the workshop guidance recommends moving the harness while watching the meter to find intermittent shorts. The low reading of the same element is P2A1C.
Possible causes
- Internal winding short in metering element E high
- Lead of element E chafed onto a powered wire or pins bridged by moisture medium
- Defective output stage in the control unit low
Symptoms
- Check engine light on
- Marked power limitation
- Engine may cut out
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A1D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- saabwisonline.com/9-5-9600/2002/2-engine/engine-management-system-v6-diesel/fault-diagnosis-diagnostic-trouble-codes/p0259
- saabwisonline.com/9-5-9650/2011/2-engine/engine-management-and-fuel-system-4-cyl-diesel/fault-diagnosis-diagnostic-trouble-codes/dtc-p0251-p0254