P2A19
Injection Pump Fuel Metering Control D High (Cam/Rotor/Injector)
P2A19 is stored when the circuit of metering element D reads high – for instance a control line shorted to battery voltage, an actuator coil with shorted turns pulling excessive current, or a driver that no longer switches off. The fault is electrical; whether the element would still meter correctly cannot be judged until the circuit is repaired. Element D exists only on systems with four or more separately controlled metering elements. No manufacturer documents P2A19 publicly. Saab's 2011 9-5 diesel illustrates the pattern on its single regulator: a short to voltage lasting more than one second sets P0254 as a Type A fault, lighting the warning lamp at once. P2A18 covers the opposite direction, P2A17 the functional fault of the same element.
Possible causes
- Control line of element D shorted to battery voltage high
- Actuator coil of element D with shorted turns medium
- Output stage in the control module stuck switched on low
Symptoms
- Warning lamp on immediately
- Severe power reduction
- Possible stalling or no start
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2A19
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- saabwisonline.com/9-5-9650/2011/2-engine/engine-management-and-fuel-system-4-cyl-diesel/fault-diagnosis-diagnostic-trouble-codes/dtc-p0251-p0254
- saabwisonline.com/9-5-9600/2002/2-engine/engine-management-system-v6-diesel/technical-description/fuel-pressure-valve-fuel-rail