P2A17
Injection Pump Fuel Metering Control D Range/Performance (Cam/Rotor/Injector)
P2A17 means fuel metering element D is not delivering what the control module commands, although its circuit shows no electrical fault. Volvo and Mack document the code for their 11 and 13 litre engines (including Mack MP7/MP8) built to the US17 emissions level, together with P0257 and P2A1F. These engines pressurise the common rail with three cam-driven pumping injectors, each riding a double lobe that strokes it twice per camshaft turn. One bulletin points to an assembled camshaft whose injector lobe can twist on the shaft; it usually slips by 60°, and around 15° is already enough to trigger the code and lose power. Another groups P2A17 with low rail pressure, leak and regulator learning codes and asks for Tech Tool 2.7.85 or later plus guided diagnostics.
Possible causes
- Injector lobe turned on the assembled camshaft (Volvo/Mack US17) high
- Rail pressure problem such as an internal leak or poor low-pressure supply medium
- Worn pumping injector or rocker of element D medium
- Outdated diagnostic software leading to wrong test results low
Symptoms
- Check engine light on
- Lack of power
- Further rail pressure codes stored at the same time
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P2A17
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1971.1
- static.nhtsa.gov/odi/tsbs/2019/MC-10154397-9999.pdf
- static.nhtsa.gov/odi/tsbs/2019/MC-10154332-9999.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10213310-0001.pdf
- fleetmaintenance.com/equipment/powertrain/article/21131180/getting-the-most-out-of-heavy-duty-fuel-injection-systems