OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A0F

Fuel Supply Heater Performance

A fuel supply heater warms the fuel on its way to the engine. On diesels it sits at the filter so that paraffin wax cannot block it in frost; on flex-fuel engines running on high ethanol blends heated fuel eases cold starts, as a Kia patent with a heated ethanol path to a separate cold-start injector shows. P2A0F says the heater is being driven but does not achieve the expected effect, for example the fuel temperature fails to rise. No manufacturer documents P2A0F publicly. GM diesels supervise only the electrical side of their fuel supply heater, through the relay driver (e.g. P2688), and treat that as a Type C fault without MIL; CARB covers such parts as comprehensive components. Possible consequences are hard cold starts, rough running or loss of power in severe cold.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 0F

Possible causes

  • Heating element burnt out or with too high resistance high
  • Heater relay, fuse or supply wiring not delivering full voltage medium
  • Fuel temperature sensor reports wrongly, so the heating effect seems absent low

Symptoms

  • Hard starting in cold weather
  • Rough running or power loss in severe frost
  • Fault code stored, warning light depending on manufacturer

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2A0F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication