OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A03

O2 Sensor Circuit Range/Performance Bank 2 Sensor 1

Bank 2 is the cylinder bank that does not contain cylinder 1, so P2A03 only occurs on V or flat engines; sensor 1 is the oxygen sensor ahead of that bank's converter used for fuel control. The fault is the bank-2 counterpart of P2A00: the sensor delivers a signal, yet fuel control cannot close the loop with it or keep it closed. In the Saab 9-4X (GM V6, LF1/LFW), P2A03 is logged when bank 2's fuel control loop is still reported open 30 s after the enabling conditions are met, as a two-trip Type B fault. GM's 2018 tables list P2A03 in the fault group for bank 2, sensor 1, which holds back the monitors that depend on that sensor. CARB demands detection when a sensor keeps the fuel system out of closed loop. Consumption and emissions of that bank rise while the loop is open.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 03

Possible causes

  • Bank 2 front sensor aged or poisoned, too slow to reach closed loop high
  • Sensor heater weak or wiring with high resistance, sensor stays too cold medium
  • Exhaust leak at the bank 2 manifold ahead of the sensor medium
  • Real mixture problem on bank 2 (injector, vacuum leak) the sensor reports correctly low

Symptoms

  • Check engine light on
  • Higher fuel consumption
  • Rough idle or exhaust odour
  • Failed emissions inspection

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2A03

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication