OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2A01

O2 Sensor Circuit Range/Performance Bank 1 Sensor 2

Sensor 2 on bank 1 sits behind the catalytic converter and mainly serves to judge how well the converter stores oxygen. Ford uses P2A01 for a signal that is out of range on the low side: on petrol engines with certain Continental control modules from 2011, and still in its 2020–2023 summary, a reading under −0.2 V lasting 10 s sets the code, usually because signal and return wires are swapped or the sensor is worn. On diesels this position is often taken by a NOx sensor with an oxygen output: Ford checks it against a calculated oxygen level, and GM's 2025 diesel tables let it differ from sensor 1 by at most 6 % at full load (120 of 240 samples, Type B). Mazda's CX-9 bulletin SA-004/19 links it to engine oil inside connector C-34 from a leaking oil pressure switch.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / 01

Possible causes

  • Downstream sensor worn or contaminated high
  • Engine oil or moisture in the sensor connector (Mazda CX-9 connector C-34) medium
  • Signal and return wires swapped, e.g. after a sensor replacement medium
  • On diesels, oxygen output of the second NOx sensor drifting medium

Symptoms

  • Check engine light on
  • Catalyst or aftertreatment monitor stays incomplete
  • Usually no noticeable change in driving behaviour

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2A01

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication