P28EA
Shift Motor Position Sensor Circuit Range/Performance
P28EA covers a position signal that is electrically valid but implausible: the two channels disagree, the value does not move although the motor runs, or the actuator ends up away from the expected detent. Hyundai uses the code in bulletin 22-AT-001H for its shift-by-wire models with two failure types, P28EA71, SBW actuator stuck, and P28EA77, commanded position not reached. The diagnosis compares target and actual lever positions in the SCU data and checks that both position sensor readings total about 100 percent; a related bulletin covers replacing the position sensor or actuator. A Denso patent explains why the check works: the controller relates the encoder count to changes of two output shaft signals. CARB requires rationality checks on inputs. Shifting is limited or refused.
Possible causes
- SBW actuator stuck or not reaching the commanded position high
- Position sensor channels drifting apart (sum no longer near 100 percent) medium
- Intermittent contact in the sensor or actuator harness medium
Symptoms
- Shifter system malfunction message in the cluster
- Cannot shift out of Park or into the requested range
- Gear display does not match the selected range
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P28EA
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.