OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28E6

Shift Motor Overspeed

P28E6 is set when the shift motor turns faster than its control allows. In a position-controlled actuator this is visible from the rotor feedback: the encoder count changes quicker than the commanded movement can explain. Plausible reasons are a load that suddenly disappears, for example a broken gear or coupling between motor and selector shaft, a control loop running away after a feedback error, or a faulty speed or rotor signal. No manufacturer documents P28E6 publicly. A Denso patent describes the logic: the motor is driven by feedback until the encoder reaches a target count, with output shaft sensors confirming the detent position; Hyundai Kefico uses a brushless motor in its SBW actuator. CARB requires functional checks on outputs. The actuator may overshoot the range or be shut down.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / E6

Possible causes

  • Broken gear or coupling inside the actuator, motor spins without load medium
  • Faulty rotor position or encoder signal medium
  • Control software error in the shift control unit low

Symptoms

  • Shift system warning in the cluster
  • Wrong range engaged or range change aborted
  • Clicking or whirring from the actuator

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P28E6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication