OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28E5

Shift Motor Performance

P28E5 judges the shift motor by its result: it is driven, but the actuator does not get to the commanded range as expected. Hyundai lists it in bulletin 22-AT-001H for the shift-by-wire Palisade, Santa Fe, Sonata and Tucson (including hybrids) with two failure types: P28E577, commanded position not reached, and P28E592, SBW motor performance. The bulletin tells technicians to watch the motor feedback current in the SCU data while pressing a shift button; a brief current means the SCU drives the actuator, no current points to the SCU or its wiring. It also compares target and actual lever positions to separate actuator from shifter faults. A Denso patent shows the motor being stopped at a target encoder count, which is the check this code relies on.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / E5

Possible causes

  • SBW actuator worn internally or mechanism stiff high
  • Shift control unit or its harness not delivering motor current medium
  • Low 12 V supply during the shift medium
  • Shift control software needing an update low

Symptoms

  • Shifter system malfunction message in the cluster
  • Range not engaged or engaged with delay
  • Wrong gear display

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P28E5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication