OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28E4

Shift Motor Driver Current/Temperature Too High

P28E4 says the output stage that powers the shift motor has reached its current or temperature limit and has protected itself. A blocked actuator is the classic trigger: if the detent plate, the park pawl linkage or the gear train inside the actuator binds, the motor stalls and current climbs. Shorts between phases, or many range changes in a row in hot conditions, can also heat the driver. No manufacturer documents P28E4 publicly. In a Denso shift range patent the motor driver energises the three phases and a motor relay sits between driver and battery, so the controller can cut power when a limit is hit; Hyundai Kefico integrates control unit and brushless motor in one SBW actuator. CARB requires circuit and functional checks on outputs. Until it cools down, the system may refuse shifts.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / E4

Possible causes

  • Detent mechanism, park pawl linkage or actuator gearing binding high
  • Short between two motor phases medium
  • Driver overheated after repeated range changes or high ambient heat low

Symptoms

  • Shift system warning in the cluster
  • Range change stops halfway or is refused
  • Problem may disappear after the system cools down

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P28E4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication