P28E3
Shift Motor Phase U-V-W Performance
P28E3 covers the phase circuits of the shift motor when none of them is clearly open or shorted, yet they do not behave as expected: one phase draws noticeably more or less current than the others, or the current pattern does not match the commutation step. Such an imbalance comes from a phase with raised resistance, a partly shorted winding or a weak switch in the driver, and it shows up as uneven torque. No manufacturer documents P28E3 publicly. A Denso shift range patent describes the motor driver that energises U, V and W according to the rotor position and stops the motor at a target encoder count; Hyundai Kefico builds its SBW actuator around a brushless motor. CARB requires functional checks on outputs. Range changes may be slow, noisy or refused.
Possible causes
- Corroded or loose contact raising the resistance of one phase high
- Partly shorted turns in a motor winding medium
- Degraded switch in the motor driver low
Symptoms
- Shift system warning in the cluster
- Slow or noisy range changes
- Occasional refusal to change range
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P28E3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.