OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28E0

Shift Motor Phase U-V-W Circuit Low

The shift motor is the three-phase electric motor of an electronic range actuator: in shift-by-wire systems it turns the detent plate and selector shaft between P, R, N and D. A Denso patent describes such a motor whose driver energises the U, V and W phases in turn, with a motor relay in the supply; Hyundai Kefico sells its SBW actuator with a brushless motor. P28E0 reports a phase voltage below what the driver commands, typically a phase lead or winding shorted to ground. No manufacturer documents P28E0 publicly; Hyundai lists the open-circuit sibling P28E2. CARB requires circuit checks on outputs. The controller usually cuts the motor off, so the selected range can no longer be changed and the car may be stuck in P.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / E0

Possible causes

  • Phase lead to the actuator chafed and shorted to ground high
  • Motor winding shorted to the actuator housing (moisture, insulation damage) medium
  • Output stage in the shift control unit faulty low

Symptoms

  • Shift system warning in the cluster
  • Selected range cannot be changed, vehicle may stay in Park
  • Engine may not start because Park or Neutral is not confirmed

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P28E0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication