OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28DB

Clutch B Motor Position Sensor Circuit Range/Performance

P28DB flags a rotor position signal for the clutch B motor that is electrically present but fails the plausibility tests: angle steps arrive in a wrong order, a transition is skipped, or the derived speed disagrees with the phase currents and the measured clutch pressure. CARB 13 CCR 1968.2 calls for such rationality monitoring of input signals where it is technically feasible, beyond pure circuit checks. Interference through a damaged screen, a wire strand partly broken, a sensor or target magnet that has shifted, or metallic debris on the target are typical findings. Because commutation then goes wrong, the motor may judder or stall and P28D8 or P28D9 can follow. P28DA is the hard circuit fault, P28CC the clutch A twin. No carmaker documents P28DB.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / DB

Possible causes

  • Electrical interference through a damaged screen on the sensor lead high
  • Partly broken strand in the clutch B position sensor wiring medium
  • Sensor or target magnet shifted, or metallic debris on the target medium

Symptoms

  • Clutch B engages roughly or drops out intermittently
  • Transmission warning, sometimes only after several trips
  • Motor speed codes for clutch B stored alongside

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P28DB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication