OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28D9

Clutch B Motor Underspeed

P28D9 indicates that the clutch B motor cannot reach the speed it is commanded to, leaving the pump short of flow to raise or adjust clutch pressure. Getrag states that its pump actuators control pressure consistently down to low temperatures, so a motor that persistently lags points to extra drag rather than normal cold behaviour: particles caught in the gerotor, a tight bearing, or oil of the wrong grade. Stellantis names jammed actuator pumps on the 7HDT300 in bulletin 21-040-26, but lists P28D5 there, not P28D9. On the electrical side a weak supply or a driver stage that reduces output due to heat, logged as P28D6, can also hold the motor back. Excess speed is P28D8; P28CA is the clutch A version. No threshold is public.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / D9

Possible causes

  • Particles caught in the clutch B gerotor pump high
  • Tight or damaged bearing in the clutch B motor or pump medium
  • Incorrect transmission fluid with too high viscosity low
  • Low supply voltage or poor ground at the actuator low

Symptoms

  • Delayed or jerky engagement of clutch B
  • Fault more likely after standing in the cold
  • Clutch B gears may be withheld

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P28D9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication