OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28D5

Clutch B Motor Phase U-V-W Performance

P28D5 means the clutch B motor wiring passes the electrical checks, yet the motor's behaviour, its phase currents and resulting rotation, does not follow what the controller demands. It is one of the few codes in this group with a public manufacturer reference: Stellantis bulletin 21-040-26 (May 2026), valid for Jeep Renegade and Compass of model years 2022-2025 sold in Europe with the 1.5 MHEV and the 7HDT300 hybrid DCT, pairs P28D5 with the clutch temperature code P27F3. That pair points at the actuator cylinder for the even gears; particles inside the gearbox can jam one of its pumps. The MIL is lit, and if the activation routine fails, the even-gear actuator is renewed with 3.0 labour hours allowed. P28C7 is the odd-gear twin.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / D5

Possible causes

  • Particles from the gearbox jamming a pump in the even-gear actuator (Stellantis 7HDT300) high
  • Clutch B actuator motor running stiff or weak medium
  • Raised contact resistance on one phase causing uneven currents low

Symptoms

  • MIL on, transmission warning shown
  • Even gears not available on the 7HDT300
  • Often logged together with clutch B temperature code P27F3

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P28D5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication