OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28D0

Clutch A Pressure Sensor Circuit Range/Performance

P28D0 is the rationality fault of the clutch A pressure sensor: its voltage lies inside the valid window, but the indicated pressure does not match what the system should be producing. In a pump actuator the controller can cross-check this well, because pressure in the clutch circuit rises with pump motor speed and current; an EVS32 paper describes how directly the gerotor flow translates into clutch pressure. A sensor that drifts, sticks at one value, or reacts slowly fails that comparison, as does a reading with no pressure at rest. CARB asks for such two-sided checks where feasible. Real pressure problems from leaks or a weak pump may show up together with P28C8. No manufacturer publicly documents P28D0.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / D0

Possible causes

  • Clutch A pressure sensor drifting or sticking high
  • Real pressure deviation from leakage or weak pump, misread as a sensor fault medium
  • Contact resistance in the signal path shifting the reading low

Symptoms

  • Harsh or slipping engagement of clutch A
  • Transmission warning, possibly after some time driving
  • Gears on clutch A may be withheld

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P28D0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication