P28C7
Clutch A Motor Phase U-V-W Performance
P28C7 flags that the clutch A motor's phases are electrically intact but the motor does not respond as expected, e.g. currents and rotation do not match the commanded drive. Stellantis documents it in bulletin 21-040-26 (May 2026) for European 2022-2025 Jeep Renegade and Compass with the 1.5 MHEV engine and the 7HDT300 hybrid dual-clutch gearbox: together with P2787 it points to the actuator cylinder of the odd-gear clutch, which in this gearbox is clutch A. Cause given there is small debris in the transmission blocking a pump inside the actuator; the MIL comes on and odd gears may be lost. If the guided test fails, the actuator is replaced (1.5 labour hours). The even-gear counterpart is P28D5 with P27F3.
Possible causes
- Debris from the transmission jamming the pump in the clutch A actuator (Stellantis 7HDT300) high
- Worn or sluggish clutch A actuator motor medium
- Increased resistance in a phase connection causing unbalanced currents low
Symptoms
- MIL and transmission warning lamp on
- Odd gears unavailable on the 7HDT300
- Often stored together with clutch A temperature code P2787
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P28C7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.