OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28C3

EVAP System High Load Purge Line B Performance

Under boost the intake manifold is above ambient pressure, so turbo engines add a high-load purge path: compressed air drives an ejector (venturi) that draws canister vapour into the compressor inlet, with check valves keeping boost out of the tank side. CARB requires every purge path to be checked for missing flow, from 2021 including disconnected lines, unless the high-load path carries under 1 percent of purge mass on the US06 cycle. P28C3 is the function check of a second such line, B. Line A is P04F0, used for example by Genesis on the 2.5T with a dual purge ejector that clogs with debris. No manufacturer publicly documents P28C3 or names line B. Volvo's 2019–2020 Dual Purge action shows the typical fault: a check valve upsetting ejector flow at high load, logging a code and the MIL.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / C3

Possible causes

  • Check valve in high-load line B sticking, leaking or fitted the wrong way round high
  • Line B to the compressor inlet pulled off, cracked or kinked medium
  • Ejector nozzle blocked by debris or oil residue medium
  • Leak in the boost-side hose that drives the ejector low

Symptoms

  • MIL on, usually without any change in driving behaviour
  • EVAP readiness not completed
  • Occasional fuel smell after long full-load driving

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P28C3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication