P28BD
Cylinder 12 Ion Current Sense Circuit Range/Performance
P28BD reports that cylinder 12 delivers an ion signal of acceptable voltage whose content is not credible – its strength, timing or shape after the spark does not match the operating point or the rest of the engine. Saab's later detection module illustrates why content matters: it splits each raw ion trace with filters, a band-pass for the ringing that indicates knock and a low-pass for the slower part that describes combustion quality. A distorted trace corrupts both outputs. Likely sources are an eroded or oily plug, mixture errors on cylinder 12, carbon in the chamber or reduced compression. CARB counts such plausibility checks as part of input monitoring. No manufacturer documents P28BD. Electrical faults are P28BC, P28BE and P28BF; a real misfire adds P0312.
Possible causes
- Eroded or oil-wetted spark plug on cylinder 12 high
- Mixture error on cylinder 12 (injector, intake leak at that port) medium
- Carbon build-up in the cylinder 12 combustion chamber low
- Reduced compression on cylinder 12 low
Symptoms
- MIL on after the fault repeats on a later trip
- Occasional roughness, sometimes with P0312
- Knock control on cylinder 12 reacts erratically
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P28BD
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/regulations/california/13-CCR-1968.2
- saabwisonline.com/9-3-9440/2009/3-electrical-system/wiring-harness-and-components/control-module/technical-description/ionization-detection-module-740
- saabwisonline.com/9-5-9600/2003/2-engine/trionic-t7-v6/fault-diagnosis-diagnostic-trouble-codes/p0305