OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28B9

Cylinder 11 Ion Current Sense Circuit Range/Performance

P28B9 stands for an ion signal from cylinder 11 whose voltage stays inside the valid band but whose behaviour makes no sense: too weak or too strong for the current speed and load, or out of line with the other eleven cylinders. Such rationality tests belong to the input-component monitoring CARB demands. Since the reading follows the heat and pressure of the burning charge, the trigger is frequently in the cylinder itself, such as a worn or oil-fouled plug, a weak injector or a leaking valve. Saab's T7 V6 shows how strict this gets: it tallied missing combustions per cylinder and compared them with an allowance taken from a speed and load table, enabled only above 72 kPa ambient pressure and -7 °C. No manufacturer documents P28B9. P28B8, P28BA and P28BB are the electrical faults.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / B9

Possible causes

  • Worn or oil-fouled spark plug on cylinder 11 high
  • Cylinder 11 injector delivering too little or spraying poorly medium
  • Low compression on cylinder 11 (valve or ring leakage) low
  • Water or oil standing in the plug well of cylinder 11 low

Symptoms

  • MIL on after the fault is confirmed on a second trip
  • Slightly rough running, sometimes with misfire code P0311
  • Unsteady ignition timing on cylinder 11

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P28B9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication