OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28B5

Cylinder 10 Ion Current Sense Circuit Range/Performance

P28B5 reports an ion signal from cylinder 10 that is electrically valid yet implausible: its amplitude or timing after the spark does not fit the load point or departs from the remaining cylinders. Because ionisation depends on how hot and dense the burning charge is, causes include an eroded electrode gap, oil-wetted plugs, mixture errors on cylinder 10 or a compression loss. Saab's T7 V6 evaluated the ion flow of each bank for knock and retarded the affected cylinder step by step, so an untrustworthy signal tends to show up as erratic timing. No manufacturer publicly documents P28B5, and an ion-sensing V10 or V12 is not described. P28B4, P28B6 and P28B7 are the electrical faults; P0310 may accompany it.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / B5

Possible causes

  • Eroded electrode gap on the cylinder 10 plug high
  • Oil-wetted plug in cylinder 10 medium
  • Mixture error on cylinder 10 medium
  • Compression loss in cylinder 10 low

Symptoms

  • MIL, sometimes together with P0310
  • Erratic ignition timing on cylinder 10
  • Hesitation when accelerating

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P28B5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication