P28B1
Cylinder 9 Ion Current Sense Circuit Range/Performance
P28B1 indicates that cylinder 9 produces an ion signal of believable electrical level whose shape or strength does not match engine speed, load or the neighbouring cylinders. Since the reading reflects combustion pressure and temperature, the root cause is often mechanical or mixture-related: a worn or oil-fouled plug, a leaking valve, a weak injector on cylinder 9, or condensation in the plug well. Saab used the same signal to count missing combustions per cylinder over 1000 crankshaft revolutions, the interval CARB also prescribes for emission-relevant misfire. No manufacturer documents P28B1, and engines with nine or more cylinders using ion sensing are not publicly described. P28B0, P28B2 and P28B3 are the electrical faults; P0309 may follow.
Possible causes
- Worn or oil-fouled spark plug in cylinder 9 high
- Weak spray from the cylinder 9 injector medium
- Leaking valve on cylinder 9 low
- Condensation in the cylinder 9 plug well low
Symptoms
- MIL, possibly with misfire code P0309
- Noticeably uneven running at idle
- Higher fuel consumption
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P28B1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.