P28B0
Cylinder 9 Ion Current Sense Circuit
P28B0 marks an electrical circuit fault, usually an interruption, in the ion current measurement of cylinder 9. A ninth cylinder appears only on engines with ten or more cylinders, such as V10, V12 or W12 designs. Ion sensing as a production technique is publicly associated with Saab and Mecel, who brought it into series cars with the Trionic systems on four- and six-cylinder engines; for engines of ten or more cylinders no public application exists, and no manufacturer documents P28B0. The working principle would be unchanged: a small voltage across the idle plug gap, a current only when the hot gas ionises, and an evaluation channel per coil. Without that channel cylinder 9 loses misfire and knock evaluation; checks start at coil 9 and its connector.
Possible causes
- Coil 9 connector not latched or with spread terminals high
- Ion output of coil 9 without function medium
- Interrupted ion line of cylinder 9 in the harness medium
Symptoms
- MIL with ion circuit fault for cylinder 9
- Misfire and knock evaluation of cylinder 9 suspended
- Slight loss of power from retarded timing
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P28B0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.