OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28AA

Cylinder 7 Ion Current Sense Circuit Low

P28AA reports that the ion current reading from cylinder 7 has dropped below the floor the engine computer accepts. Ion sensing places a measuring voltage on the spark plug between firings; Saab's Trionic T8 coils generate about 120 V for this themselves. If that voltage leaks away through a carbon track inside the plug boot, a split insulator or a signal lead rubbing on the block, the evaluator sees almost no current even when the mixture burns normally. Because the reading then resembles a dead cylinder, a misfire code such as P0307 may be stored alongside. Cylinder 7 exists only on V8 and larger engines, and no maker publicly documents an ion-sensing engine of that size or this code. P28AB covers the opposite fault, P28A8 the open circuit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / AA

Possible causes

  • Carbon track inside the cylinder 7 plug boot high
  • Ion signal lead of cylinder 7 rubbed through to ground medium
  • Split ceramic insulator on the cylinder 7 plug medium
  • Measuring-voltage stage in coil 7 no longer working low

Symptoms

  • MIL lit with a low ion reading stored for cylinder 7
  • Misfire code P0307 may appear although the engine runs smoothly
  • Reduced power from protective ignition timing

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P28AA

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication