P28A9
Cylinder 7 Ion Current Sense Circuit Range/Performance
P28A9 means cylinder 7 returns an ion signal that is electrically sound but not believable for the current speed and load, or that stands out against the other cylinders of an eight-or-more-cylinder engine. Because the current through the plug gap grows with combustion pressure and temperature, a lean or misfiring cylinder 7 produces this picture as readily as a fouled plug or moisture in the well. The signal serves both misfire detection and knock control, as Saab's ion-sensing T7 V6 illustrates by analysing each bank's ion flow for knock. No manufacturer documents P28A9 publicly, and no production V8 with this measurement is publicly described. Electrical faults on cylinder 7 are reported as P28A8, P28AA and P28AB.
Possible causes
- Fouled or worn spark plug in cylinder 7 high
- Lean mixture or misfire in cylinder 7 medium
- Moisture in the plug well of cylinder 7 low
Symptoms
- MIL, possibly together with P0307
- Uneven idle
- Knock control retards timing more often
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P28A9
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.