OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28A8

Cylinder 7 Ion Current Sense Circuit

P28A8 covers a basic circuit fault in the ion current measurement of cylinder 7, so the module obtains no evaluable signal from that plug. A cylinder 7 only exists on engines with eight or more cylinders, and Saab, the best-known user of ion sensing, applied it to four-cylinder and V6 engines; no maker publicly describes an eight-cylinder version. No manufacturer publicly documents P28A8. Its physical position depends on the maker's numbering, which differs between brands on V8 engines. The principle stays the same: a bias voltage across the plug gap lets the burning gas conduct a small current, and a lost signal blinds misfire and knock assessment for that cylinder. Diagnosis starts at coil 7, its connector and the spark plug.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / A8

Possible causes

  • Coil of cylinder 7 with defective ion measuring function high
  • Broken wire or loose connector in the cylinder 7 ion circuit medium
  • Cylinder 7 input of the evaluation electronics faulty low

Symptoms

  • MIL with ion fault stored for cylinder 7
  • Misfire and knock monitoring of cylinder 7 unavailable
  • Some power loss from protective timing

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P28A8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication