OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28A3

Cylinder 5 Ion Current Sense Circuit High

P28A3 indicates a cylinder 5 ion signal locked above its permitted ceiling. Contact between the signal path and a voltage source, a coil 5 that injects ignition energy into its output, or a disturbed ground reference can cause it. The closest documented logic comes from Saab's T7 V6, where cylinder 5 is served by the bank 1 discharge module: Saab code P1313 detects an open or short to B+ on that bank's combustion line once it exceeds 5 V for 200 combustions, requires the engine to be running with ignition synchronised, and needs 300 clean combustions for the OK report. Naming cylinder 5 directly would require one measuring circuit per cylinder; no manufacturer documents P28A3 publicly. The low reading is P28A2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / A3

Possible causes

  • Signal path of cylinder 5 in contact with a voltage source high
  • Coil 5 feeding ignition energy into its measuring output medium
  • Disturbed ground reference of the evaluation circuit low

Symptoms

  • MIL with high ion signal on cylinder 5
  • Ignition retarded on cylinder 5, less power
  • Knock events may not be recognised

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P28A3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication