OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P28A2

Cylinder 5 Ion Current Sense Circuit Low

P28A2 is stored when the cylinder 5 ion reading stays under its lower threshold. The measurement relies on a constant bias across the plug gap between sparks – about 80 V on Saab's T7 discharge modules – and anything that drains it to ground pulls the reading down: a chafed signal conductor, a cracked plug insulator, or a coil whose bias supply has failed. On Saab's four-cylinder T7, a combustion line shorted to ground produced no dedicated fault code and surfaced only as misfire codes, which illustrates the gap such a low-side code closes. On Saab's V6 the bank 1 module serves cylinders 1, 3 and 5 together. No manufacturer publicly documents P28A2. P28A3 is the high-side fault.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / A2

Possible causes

  • Signal conductor of cylinder 5 chafed against ground high
  • Cracked insulator on the cylinder 5 spark plug medium
  • Bias supply of coil 5 failed medium

Symptoms

  • MIL with low ion signal on cylinder 5
  • Misfire codes for cylinder 5 may appear
  • Safety ignition map reduces power

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P28A2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication