P28A0
Cylinder 5 Ion Current Sense Circuit
P28A0 reports that the ion current circuit of cylinder 5 delivers no evaluable signal. A cylinder 5 exists only on engines with five or more cylinders, which narrows the field considerably. The V6 of the Saab 9-5 with Trionic T7 is a documented ion-sensing example: cylinder 5 sits in bank 1 with 1 and 3, is triggered from engine module pin 31, and is fired together with cylinder 2 until synchronisation. That design, however, measures one combined voltage drop per bank, so a single-cylinder circuit fault cannot be isolated electrically; Saab instead counts missing combustion signals per cylinder for misfire code P0305. No manufacturer publicly documents P28A0.
Possible causes
- Coil of cylinder 5 with failed ion measuring circuit high
- Connector or wire fault between coil 5 and the evaluation electronics medium
- Evaluation input for cylinder 5 defective low
Symptoms
- MIL with ion fault stored for cylinder 5
- Misfire monitoring of cylinder 5 restricted
- Retarded timing and slightly reduced power
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P28A0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.