OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P289D

Cylinder 4 Ion Current Sense Circuit Range/Performance

P289D is a rationality fault: cylinder 4 supplies an ion trace that is electrically present but not credible, for instance a combustion peak far smaller than the others at equal load, or erratic changes between cycles. Low-pass filtering of this trace gives the combustion information, band-pass filtering the knock content, so a distorted signal degrades both functions for cylinder 4. On the 2009 Saab module, the cylinder 4 ion input is pin 15 and it is combined with cylinder 2 into the second combustion signal. Wear or fouling of the plug, an oil-wetted plug well, or a genuine mixture or compression problem in cylinder 4 are typical triggers. No manufacturer publicly documents P289D; P289C, P289E and P289F cover the electrical faults.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 9D

Possible causes

  • Worn or fouled spark plug in cylinder 4 high
  • Oil in the plug well of cylinder 4 from a leaking cover gasket medium
  • Mixture or compression problem in cylinder 4 medium

Symptoms

  • MIL, sometimes accompanied by P0304
  • Noticeable vibration at idle
  • Fuel consumption rises slightly

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P289D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication