P2899
Cylinder 3 Ion Current Sense Circuit Range/Performance
With P2899 an ion signal from cylinder 3 does arrive, yet it fails the plausibility check: its amplitude is too weak for the current load, it fluctuates without reason, or it no longer matches the pattern of the remaining cylinders. Because the measurement mirrors how hot and how highly compressed the burning charge is, an actual combustion weakness in cylinder 3 can be the cause just as much as a degraded plug with a leakage path. In Saab's 2009 detection module, cylinder 3 enters on its own input and is merged with cylinder 1 into the first combustion signal, while a band-pass branch extracts knock ringing from the same raw trace. No maker documents P2899 publicly. Hard electrical faults on cylinder 3 are P2898, P289A and P289B.
Possible causes
- Spark plug of cylinder 3 with deposits or excessive gap wear high
- Weak combustion in cylinder 3 (lean injector, low compression) medium
- Damaged plug boot or moisture at the coil 3 connection low
Symptoms
- MIL, possibly together with P0303
- Slight roughness at idle or under light load
- Knock control retards timing more than usual
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2899
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.