OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2895

Cylinder 2 Ion Current Sense Circuit Range/Performance

P2895 is set when cylinder 2 delivers an ion signal that is electrically intact but does not behave plausibly – for example, it shows almost no combustion peak at normal load, or it scatters strongly from cycle to cycle compared with the neighbouring cylinders. Because the ion current is a direct image of combustion, a genuine problem in cylinder 2 such as a lean injector, a leaking valve or low compression can trigger this code just as well as a dirty plug. That makes it worth reading misfire counters and fuel trims before replacing parts. Saab processes the raw signal with filters that separate the slow combustion part from the fast knock ringing. No manufacturer describes P2895 publicly; electrical faults on cylinder 2 belong to P2894, P2896 and P2897.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 95

Possible causes

  • Worn or fouled spark plug in cylinder 2 high
  • Combustion fault in cylinder 2 (injector, valve, compression) medium
  • Coil 2 measuring stage drifting with temperature medium

Symptoms

  • MIL, sometimes with misfire code P0302
  • Uneven running felt mainly at idle
  • Increased fuel consumption

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2895

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication