P2891
Cylinder 1 Ion Current Sense Circuit Range/Performance
Here the ion signal of cylinder 1 is present but implausible: its level or waveform does not fit engine speed and load, or it differs clearly from the other cylinders. Fouled or worn spark plugs are a frequent reason, since soot or oil deposits form a leakage path that distorts the small measuring current; a cracked insulator or water in the plug well has a similar effect. In Saab's later processing module (9-3 from 2009), cylinder 1 enters on its own ion input and is combined with cylinder 3 in a combustion signal used for synchronisation and misfire detection, so a distorted cylinder 1 signal affects that pair. No manufacturer documents P2891 publicly. Electrical opens and shorts are covered by P2890, P2892 and P2893.
Possible causes
- Sooted, oil-fouled or worn spark plug in cylinder 1 high
- Moisture or oil in the plug well of cylinder 1 medium
- Ion measuring stage of coil 1 drifting medium
- Real combustion fault in cylinder 1 (mixture, compression) low
Symptoms
- MIL, sometimes together with misfire codes
- Rough idle or hesitation
- Reduced power due to cautious knock control
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2891
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.