P288F
Shift Fork B Actuator Control Circuit Driver Current/Temperature Too High
P288F tells that the driver for the shift fork B actuator has crossed its current or temperature limit, after which the TCM curbs or stops the actuator to save the electronics. Public manufacturer criteria for P288F are not available. Ford's DPS6 summary gives the setting: drum B, turned by its own three-phase motor, moves the forks that engage reverse and the gears 2, 4 and 6, and Ford files driver chip faults on that motor under P2836 instead. An actuator that pushes against a seized drum, a fork worn into its groove or a short in the motor lead drives current up, and hot fluid or a hot engine bay adds thermal stress. CARB 13 CCR 1968.2 provides the general basis. In practice the vehicle may refuse reverse or fall back to odd gears only, which makes parking and manoeuvring awkward.
Possible causes
- Short in the fork B actuator motor or its lead high
- Seized drum B or fork worn into its groove medium
- Excessive fluid or ambient temperature low
- Driver stage in the TCM failing low
Symptoms
- Reverse not available, even gears skipped
- Warning lamp and limp mode
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P288F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.