OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P288D

Shift Fork B Calibration Not Learned

P288D is the fork B counterpart of P287B: the stored learn values that tell the control unit where fork B or its drum sits in each gear are missing or rejected. No manufacturer documents P288D publicly, and Ford's 2014 catalogue still knew only one fork calibration code, P287B, which suggests the split into A and B came later. On Ford's DPS6, drum B handles reverse plus the 2nd, 4th and 6th gears, with detents near 10, 90, 190 and 280 degrees, so a missing reference mainly hits reverse and the even gears. CARB 13 CCR 1968.2 requires transmission functions of this kind to be monitored. Before relearning, check for drum B position or motor faults such as P2837 or P2836, because the learn usually aborts while those are present; after a TCM swap the procedure is simply part of the job.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 8D

Possible causes

  • Fork learn not carried out after TCM or mechatronic work high
  • Drum B position or motor fault aborting the learn medium
  • Worn or bent fork B, worn drum groove low

Symptoms

  • Reverse or even gears hesitant or unavailable
  • Transmission warning, possibly MIL

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P288D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication