OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P288B

Park Lock/Pawl Actuator Circuit Performance

P288B means the park lock actuator is electrically intact but does not do what it is told, for example the lock fails to move in time. Ford's 2024-25 summary calls it functionally stuck off on its front-drive 8-speeds and mechanically stuck off on the TR9070 dual-clutch box. Several bulletins cure it with software: Ford 21-2107 for the 2020 Escape with 8F24, which could drop into Park during start-stop and lit the wrench lamp; Nissan NTB20-038 for the 2020 Titan, where two attempts were needed to leave Park; Audi 2080044 for 2025 A5 and Q5 models that could not select P; and FCA for the 2017-18 Pacifica Hybrid, where P288B became a permanent code that blocked smog checks. Only if it returns after an update is the actuator or wiring suspect.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 8B

Possible causes

  • Control software needing an update (Ford, Nissan, Audi, FCA) high
  • Sluggish or sticking park lock actuator or pawl mechanism medium
  • Low supply voltage or poor connection under load low

Symptoms

  • P cannot be selected or needs several attempts to leave
  • Unexpected shift to P during start-stop
  • Warning lamp or MIL

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P288B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication