P287E
Engine Disconnect Clutch Actuator Circuit/Open
In a parallel hybrid, the engine disconnect clutch (often called K0) sits between the combustion engine and the electric motor and is opened for electric driving. P287E reports that the control module sees no plausible current path through the actuator that operates this clutch, typically a pressure control solenoid in the transmission valve body or an electric actuator. An open wire, a loose connector or a burnt-out coil are the classic triggers. No manufacturer publicly documents this exact code; Audi traces a related stuck-open fault on the A3 e-tron to the pressure valve of clutch 0 in the mechatronic unit. Without a working actuator the engine can no longer be coupled reliably, so electric-only or limp-home operation is likely. Circuit Low/High are covered by P2880/P2881.
Possible causes
- Loose, corroded or water-damaged connector at the transmission or actuator high
- Broken wire in the actuator feed or return line medium
- Open coil in the clutch pressure solenoid or actuator medium
- Failed output stage in the transmission or hybrid control module low
Symptoms
- Malfunction or transmission warning in the instrument cluster
- Engine does not start or cannot drive the wheels
- Reduced power or limp-home operation
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for P287E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.