OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P287D

Electric/Auxiliary Transmission Fluid Pump Motor Torque Out Of Range

P287D means the motor of the electric auxiliary transmission pump produces a torque outside its expected band, as estimated by the pump controller from phase current and speed. Too little torque hints at a pump that runs dry or draws air; too much hints at a dragging rotor, cold thick fluid or a blocked passage. No manufacturer documents P287D publicly; the duty to monitor the pump stems from CARB 13 CCR 1968.2. Neighbouring cases set the scene: Ford's TSB 17-2056 has the 2016 F-150 2.7L with start-stop store P0C2A when its auxiliary pump does not run, and FCA lists P2797, pump performance, for the Pacifica plug-in hybrid. Because the pump keeps clutches filled while the engine is stopped, a fault often disables start-stop or causes a harsh engagement on restart.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / number8 / 7D

Possible causes

  • Low fluid or air drawn into the auxiliary pump high
  • Dragging pump rotor or blocked suction or delivery path medium
  • Worn pump motor or faulty integrated controller medium
  • Control software needing an update low

Symptoms

  • Start-stop or electric drive no longer available
  • Harsh engagement after engine restart
  • MIL on

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for P287D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication